MOV.AI Flow can only run one flow at a time in a simulator or a real robot. If a previous flow was launched and it’s still running, then the bottom of the page shows a blueline indicating the name of the flow that is currently running and the name of the robot on which it’s running. For example, the following shows that the flow named tugbot_simple_navigation is running on the robot named robot1 –
To stop that flow running, click on the blue bar to reopen that flow page, as shown below –
Click the Stop button. The green dots stop flashing. The behavior of the robot after the flow is stopped depends on the robot’s controller. For example, in simulator the robot might continue to follow the last command sent to it. However, this won’t happen for a real robot because of its hardware design.
Updated 10 months ago